Sound Insulation Testing Terminology
Sound Insulation Testing Terminology
Developers and landlords may need to improve sound insulation over a
wide range of houses and flats. This may be due to the fact they have just
built a new development that requires sound insulation testing under Part E or
as part of a general refurbishment programme, i.e. changing houses into flats.
Often confusion can arise from the large amount of ‘terms’ used in conjunction with acoustic design and sound insulation testing. To help with this we have made a list of the following terms for clarity:
Absorption
This is the conversion of sound energy into heat, often by the use of a porous
material.
Absorbent Material
This is a material that absorbs sound energy, such as acoustic mineral wool.
Airborne sound
This is sound which is propagated from a noise source through the medium of
air. Examples of these are speech and sound from a television
Airborne Sound Transmission
This is direct transmission of airborne sound through walls or floors. When
sound energy is created in a room, for instance by conversation, some of the
energy is reflected or absorbed by room surfaces but some may set up vibrations
in the walls and floor. Depending on both the amount of energy and the type of
construction, this can result in sound being transmitted to adjacent parts of the
building.
Air Path
This is a void in construction elements, which adversely affects the
performance of sound resisting construction. Examples of air paths include
incomplete mortar joints, porous building materials, gaps around pipes and
shrinkage cracks – this can also effect the air tightness results.
Bonded resilient cover
This is a thin resilient floor covering normally of minimum 3-5mm thickness,
which is bonded to the isolated screed surface to reduce impact sound
transmission such as footfall noise, however it has a lesser effect when it
comes to airborne noise.
Cavity stop
This is a proprietary product or material such as mineral wool (fibre) used to
close the gap in a cavity wall.
Composite Resilient Batten
This is composed of a timber batten with a pre-bonded resilient material to
provide isolation between the flooring surface layers and floor base.
Cradle/Saddle
This is an intermediate support system (with a resilient layer base, either
pre-bonded or already integral) using levelling packer pieces to support a
timber batten, isolating it from the floor base.
Decibel (dB)
This is the unit used for different acoustic quantities to indicate the level
with respect to a reference level.
Density (kg/m3)
This is the mass per unit volume, expressed in kilograms per cubic metre
(kg/m3). Blockwork is commonly referred to by industry in terms of strength (in
Newtons). However, it is the density that has the important role in terms of
sound insulation.
Direct transmission refers to the path of either airborne or impact sound through elements of construction.
DnT,w
This is the weighted standardized level difference. A single-number quantity
(weighted) which characterises the airborne sound insulation between two rooms,
in accordance with BS EN ISO 717-1:1997
Façade Testing
This Standard – ISO 140-5:1998) specifies the testing methods to evaluate the
sound insulation in buildings and building elements for facades. Three rounds
of a proficiency testing scheme for airborne sound insulation measurements have
been performed according to the methods specified in the standard for a whole
facade by using an external loudspeaker as the noise source.
Flanking element (flanking wall)
This is any building element that contributes to the airborne sound or impact
transmission between rooms in a building which is not the direct separating
element (i.e. not the separating wall or separating floor).
Flanking strip or edge strip
This is a resilient strip using foamed polyethylene normally 5 mm thick, which
is located at the perimeter of a floor to isolate the floor boards from the
walls and skirtings.
Flanking transmission
This is airborne or impact transmission between rooms that is transmitted via
flanking elements and/or flanking elements in conjunction with the main separating
elements. An example of a flanking element is the inner leaf of an external
wall that connects to the separating ‘core’ of a wall or floor.
Flexible closer
This is a flexible cavity stop or cavity barrier which seals the air path in
cavities linking adjoining dwellings.
Floating floor treatment (FFT)
This is a timber floating floor system which may use battens, cradles or
platform base, all of which use a resilient layer to provide isolation from the
base floor and adjacent wall elements.
Gypsum based plasterboard
This is a dry lining board applied to walls, ceilings and within floating floor
treatments which has gypsum content. It may also have fibre reinforcement
within the board.
Impact sound
This is sound which is propagated from a noise source through a direct medium.
An example of this is footfall on a floor.
Impact sound transmission
This is sound which is spread from an impact noise source in direct contact
with a building element.
Isolation
This is a strategy to limit the number and type of rigid connections between
elements of construction.
L’nT,w
This is the weighted standardized impact sound pressure level. A single-number
quantity (weighted) to characterise the impact sound insulation of floors, in
accordance with BS EN ISO 717-2: 1997.
Mass
This is a physical quantity that expresses the amount of matter in a body.
Walls and floors may be described in terms of the surface density (mass per
unit area, kg/m2) of the wall face or the floor surface, which is the sum of
the surface densities of each component of the construction. The density of
materials is expressed as mass per unit volume, kg/m3, which can be provided
via the core structure and linings such as in-situ concrete or solid dense
block walls.
Mass per unit area (or surface density)
This is is expressed in terms of kilograms per square metre (kg/m2). This is
often used to describe boards, panels, flooring and dry linings (see gypsum
based board).
Resilience
This can reduce structural vibration transmission and still maintain material
performance and overall dimensions, examples include floating floor treatments
such as resilient battens or cradles, or resilient ceiling bars.
Resilient ceiling bars
This acoustic solution is generally metal based and vary in thickness from 11
mm to 30 mm. They are mounted perpendicular to the joist span direction and can
increase both airborne and impact sound insulation. Care should be taken to
ensure that the ceiling board fixings into the resilient bar do not come into
contact with the joists and reduce the potential performance.
Resilient noggin
This is a small section of resilient ceiling bar which is used to assist in
bracing non load bearing partitions.
Rw
This is a single-number quantity (weighted) which characterises the airborne
sound insulation of a building element from measurements undertaken in a
laboratory, in accordance with BS EN ISO 717-1: 1997
Sound Insulation Testing
Sound Insulation Testing is required near the end of a development to show that
the performance of the party wall and floor partitions meet the standards as
stipulated in Building Regulations Approved Document E. The testing methods for
airborne and impact sound insulation is in full accordance with the suggested
methods presented in BS EN ISO 140-parts 4 & 7: 1998.
Stiffness
This is can improve low-frequency sound insulation, for example in floors, by reducing the potential for deflection or movement of the primary structure, therefore the correct spacing and depth of joists is important.
If you have a project that requires acoustic design and/or sound insulation testing please let us know. APT Sound Testing will ensure you will have direct contact with the allocated acoustician from the start of the process, through to the successful completion of the sound insulation testing.
For more information about Sound Insulation Testing Terminology or with regard to acoustic services, please contact us at via our APT Sound Testing website or call us today on 01525 303905.