Due to the housing shortage many houses are being converted into flats, which has resulted in a massive spike in noise complains amongst neighbours in such developments. Much of this rise in complaints are due to insufficient acoustic design at the start of the project, this means the dividing partitions are not being designed or constructed to comply with Part E of Building Regulations for Conversions.

In our experience many of the sound insulation tests we undertake on refurbishment projects achieve 30-35dB for airborne sound, which is well below the required 43dB as stipulated in Part E. For impact sound testing, the figures are usually around 70dB which is well above the required 64dB, which is also a massive failure.

Essential Acoustic Design
Taking the above into account is it essential that the acoustic design is addressed right from the start of the refurbishment project. The usual existing construction is 175mm joists with floorboards attached to the top and a single layer of plasterboard – as per the below detail:

Upgrades or changes to the buildings structure, i.e. previous service works for water pipes, drainage and heating systems may have removed acoustic materials or interfered with acoustic isolation. This can lead to a wide disparity in performance between damaged and undamaged floors or walls.

To overcome many of these issues we can visit site and undertake sample sound insulation testing through your property to establish the current noise levels. Once the noise levels have been established we can advise on acoustic upgrades to help you improve the sound insulation levels. it may be as simple as the installation of an acoustic resilient layer on the floor, or a minor wall upgrade.

UKAS Accredited Sound Testing
APT Sound Testing provides UKAS accredited sound testing for London and the whole of the UK as required by Approved Document E of the Building Regulations.

We undertake sound testing on all types of residential buildings and commercial buildings. We also undertake sound testing on schools and buildings containing rooms for residential purposes.

Our team of experienced sound test engineers are dedicated to giving our customers the best quality of service and offer acoustic design advice where possible, to help our clients achieve the required acoustic results to pass the sound testing and attain building completion. We can also undertake ‘in house’ UKAS accredited air tightness testing in one seamless package, lowering costs and negating coordination issues.

Airborne sound testing is undertaken to walls & floors. Firstly a controlled noise is generated by an amplifier and loudspeaker across a broad range of frequencies. The generated noise is very loud and is often in excess of 100dB. Initial measurements are taken using a class 1 sound level meter within the ‘source room’ followed by further measurements in the ‘receiver room’ on the other side of the wall or floor under investigation.

The source room speaker position is then changed and the measurements repeated either side of the partition under test. Thereafter background noise measurements are made using a class 1 sound level meter in the receiving room and are used to apply appropriate corrections for external sound such as traffic noise.

Similarly the reverberation time (the time taken for sound to decay by 60dB) is measured within the receiving room using the sound source and a sound level meter to determine the corrections that must be applied to account for the characteristics and absorptiveness of the room.

The difference in the two airborne noise levels (for walls and floors), corrected for background and reverberation characteristics determines the airborne sound insulation performance of the wall, or floor.

A greater airborne noise difference between the source room and the receiver room determines a higher airborne sound insulation performance and the higher chance of compliance with Approved Document E.

We have undertaken thousands of sound insulation testing in London and the UK and have a large amount of experience with helping clients with their acoustic design to achieve compliance with approved document E.

If you would like more information on airborne sound testing then please visit our contact page or call our team on 01525 303 905 or visit the APT Sound Testing website.

APT Sound Testing provides an extensive range of acoustic services from APT Sound Testing Our team of experienced acoustic engineers and technicians can assist you with independent acoustic design advice for party walls and floors and compliance with Building Regulations Part E.

We work with our clients to provide complete acoustic solution, saving you time and money. Whether you are an architect, developer, or private self-builder, we can provide advice in terms of Building Acoustics for your New-build, Conversion, or Material Change of Use projects such as HMO.

Sound Insulation Testing & Acoustic Consultancy
We can offer all types of advice from a quick site visit to provide verbal acoustic advice, to a fully-fledged acoustic design review of all relevant details for a larger development. Not only do we review the separating construction but also the junction details considering potential noise flanking issues.

Following the design stage advice, we can then carry out the sound insulation testing at the pre-completion stage so our clients can achieve building control sign-off for the acoustic element of the development. We provide our acoustic services for all types of projects from small housing developments to the largest residential developments.

What is Part E of Building Regulations?
Approved Document E of the Building Regulations requires that new attached homes are designed and constructed to provide reasonable resistance to the passage of sound via the party walls and floors and that, unless the homes are registered with Robust Details Limited, a sample of 10% of dwellings on every new development will have to be sound tested.

Using our pre-completion testing service gives you:

Quick response, fast results– the sound testing is arranged around your build schedule, and you will receive an immediate indication of test performance on site, with a full certificate/report sent electronically shortly afterwards.

Expert remedial acoustic advice– if your project fails any of the sound tests, we try to help you achieve compliance as quickly as possible. We will, whenever possible, undertake re-tests during the same visit to help you get the pass you need.

Complete compliance signoff solution– if you combine your sound insulation testing with our air leakage and energy assessment services. We will ensure swift communication between teams to clear outstanding technical conditions.

APT Sound Testing can provide telephone advice, a quote to undertake an acoustic design review of your architect’s drawings to help the likelihood of passing the sound insulation test at the first attempt, reducing the risk of costly remedial works to your project prior to handover. If you require sound insulation testing to party walls, or you need an acoustic design review on your development, please contact us now or visit our acoustic design page.

Our acoustic engineers have carried out over 10,000 sound insulation tests and have the experience to help you with any scheme.

We are also a UKAS-accredited sound testing, so you can be sure of a friendly and professional service providing a ‘one-stop’ solution for all your acoustic requirements.

If you would like more information in regards to sound testing service and/or acoustic design services in London, please contact us at 01525 303905 or info@aptsoundtesting.co.uk, for more information please visit the APT Sound Testing website or download our sound test checklist.

Sound testing is an essential aspect of property development that ensures the acoustic performance of a building meets the required standards. This process involves measuring the levels of sound insulation between adjoining properties to assess the impact of noise transfer from one area to another. The purpose of sound testing is to identify any issues and provide recommendations for remedial actions that will improve the acoustic performance of the building.

The importance of sound testing cannot be overstated as noise pollution has been shown to have negative effects on health, productivity, and general well-being. Living in a noisy environment can cause stress, sleep disturbance, and hearing impairment, which can ultimately affect the quality of life of the occupants. Therefore, it is important to ensure that buildings are acoustically insulated to mitigate the impact of noise pollution.

Sound Testing Recommendations
Sound testing is typically conducted in two stages: pre-completion testing and post-completion testing. Pre-completion testing is carried out during the construction phase of the building to identify any issues and provide recommendations for remedial action. Post-completion testing is carried out after the building is occupied to ensure that it meets the required acoustic performance standards.

The results of the sound tests are presented in the form of sound insulation values (measured in decibels) and a report that highlights any issues and recommendations for improvement. The values are compared against the minimum standards set out in building regulations and other relevant guidelines. These standards vary depending on the type of property and the intended use of the space. For example, the minimum sound insulation standards for residential buildings are different from those for commercial buildings.

Sound testing is essential for a number of reasons. Firstly, it ensures that buildings are compliant with building regulations and other relevant guidelines. Compliance with these standards is a legal requirement and failure to meet them can result in legal action being taken against the developer or owner of the property.

Secondly, sound testing helps to improve the quality of life of the occupants by reducing the impact of noise pollution. This is particularly important for residential buildings, where noise from adjacent properties can be a significant source of disturbance. By ensuring that buildings are acoustically insulated, the occupants can enjoy a quieter and more comfortable living environment.

Thirdly, sound testing can help to improve the value of a property. A building that has been sound tested and certified to meet the required standards is likely to be more attractive to potential buyers or tenants. This is because they can be assured of the quality of the building’s acoustic performance, which is an important factor for many people when choosing a property.

Sound testing is also important for ensuring that the building meets the needs of its intended use. For example, a building that is intended for use as a music studio or a cinema requires a higher level of sound insulation than a residential building. By conducting sound tests, the developer can ensure that the building meets the specific requirements of its intended use.

Sound testing is also beneficial for architects, engineers, and other building professionals. By conducting sound tests, they can identify any design flaws that may impact the acoustic performance of the building. This enables them to make necessary changes before construction begins, which can save time and money in the long run.

Furthermore, sound testing can help to reduce the likelihood of disputes between neighbors. In residential buildings, noise from adjacent properties can be a source of tension between occupants. By ensuring that the building meets the required sound insulation standards, the likelihood of disputes arising can be reduced.

It is worth noting that sound testing is not a one-time process. The acoustic performance of a building can deteriorate over time due to wear and tear, changes in the building’s use, or changes in the adjacent environment. Therefore, it is important to conduct regular sound tests to ensure that the building continues to meet the required standards.

In conclusion, sound testing is an essential aspect of property development that ensures the acoustic performance of a building meets the required standards. It has numerous benefits, including improving the quality of life of the occupants, ensuring compliance with building regulations, increasing the value of the property, and reducing the likelihood of disputes between neighbors. Therefore, it is important to conduct sound tests during the construction phase and regularly after the building is occupied to ensure that it continues to meet the required standards.

If you need help with the acoustic design and sound testing to comply with the lease condition/s on your project;  or, you have a problem with raised noise levels due to neighbours changing their floor construction, we provide an acoustic design and sound testing solution to achieve compliance with your lease condition. Please visit our website now at www.aptsoundtesting.co.uk or contact us now at 01525 303 905.

If you are changing a carpet floor finish to wooden and/or tile flooring in a leased residential dwelling, then you will need to check what your lease allows you to. In existing apartment blocks it is very common for the corresponding residential lease to contain clauses that may restrict alterations to floor finishes, this is normally where carpeted flooring is in place, but this also applies to where hard or wooden floor finishes are being altered as well e.g., wood to stone finish.

Usually, the lease clause will state that  sound insulation testing of the new floors is required to provide the same resistance to sound as the existing floor construction. In our experience, most lease conditions require sound testing prior to works commencing to ascertain the existing acoustic performance, thereafter a second set of sound tests must be undertaken once the works are complete to check that the sound insulation is the same (or better) than the original flooring.

Sometimes the lease will also stipulate that an acoustic consultant must be employed to prepare a robust acoustic design for the floor, to ensure the desired sound reduction will be achieved. It can be difficult to ensure that a wooden floor construction will offer the same acoustic performance as an existing carpeted floor, and therefore a detailed acoustic design as well as careful site installation is required to ensure compliance with the clause of the lease.

Acoustic design and sound testing for lease condition compliance

We have helped hundreds of clients to comply with the acoustics for their lease conditions, so please get in touch if you need help. We usually undertake the following process to achieve compliance:

Pre-works Sound Testing
This offers an accurate overview of the acoustic performance of the existing floor partition/s prior to the commencement of construction works. It also enables us to offer a targeted acoustic design using the sound insulation performance of the existing construction.

Acoustic Design Review
We will analyse the sound test results as well as the existing construction detail of the party floor; thereafter, we will review your proposed floor specification and forward our findings via an easy-to-follow acoustic design report. The report will contain the materials to be used as well as installation instructions to meet the requirements of the lease. The acoustic design review is very important to ensure install the correct materials to attain compliance with your lease.

Site Inspection Visit
Our engineers will visit site and check that acoustic correct materials are being installed inline with manufacturer’s guidelines.

Post-works Sound Testing
Once the new flooring is installed, we will conduct post completion sound testing to provide evidence that the lease requirements have been met, we then provide the test reports to provide to your management agent for sign off.

We have helped hundreds of clients to comply with the acoustics for their lease conditions, so please get in touch if you need help. We usually undertake the following process to achieve compliance:

If you need help with the acoustic design and sound testing to comply with the lease condition/s on your project;  or, you have a problem with raised noise levels due to neighbours changing their floor construction, we provide an acoustic design and sound testing solution to achieve compliance with your lease condition. Please visit our website now at www.aptsoundtesting.co.uk or contact us now at

In the world of construction, acoustic testing is an important process that ensures buildings meet acoustic requirements and standards. Acoustic testing involves measuring the sound transmission and insulation properties of walls, floors, and ceilings. Acoustic testing helps in identifying the areas where sound can escape or enter a building, and also helps in determining the overall sound insulation performance of a building.

In this post, we will provide an introduction to acoustic testing in the world of construction, including the types of acoustic tests, the benefits of acoustic testing, and the importance of complying with acoustic standards and regulations.

Types of Acoustic Tests

There are several types of acoustic tests that can be conducted to evaluate the sound insulation performance of a building. These tests include:

Airborne Sound Insulation Test: This test measures the sound transmission through the air, which can be heard through walls, ceilings, and floors. The test involves measuring the sound levels in a source room and a receiving room, with a partition separating them. The difference in sound levels between the two rooms is then calculated to determine the airborne sound insulation performance of the partition.

Impact Sound Insulation Test: This test measures the sound transmission caused by impact on a surface, such as footsteps or dropping an object. The test involves measuring the sound levels in a receiving room while an impact is made in a source room. The difference in sound levels between the two rooms is then calculated to determine the impact sound insulation performance of the floor.

Reverberation Time Test: This test measures the time taken for sound to decay in a room after the sound source has been switched off. The test involves measuring the sound levels in a room at various time intervals after the sound source has been switched off. The time taken for the sound levels to decay by 60 decibels is then calculated to determine the reverberation time of the room.

Benefits of Acoustic Testing

Acoustic testing provides several benefits in the world of construction, including:

Identifying areas where sound can escape or enter a building: Acoustic testing helps in identifying areas where sound can escape or enter a building, such as through walls, ceilings, and floors. This allows for the implementation of measures to improve the sound insulation performance of the building.

Ensuring compliance with acoustic standards and regulations: Acoustic testing ensures that buildings comply with acoustic standards and regulations, such as the Building Regulations Approved Document E in the UK, which sets out the minimum standards for sound insulation in buildings.

Improving the acoustic performance of buildings: Acoustic testing helps in identifying areas where the sound insulation performance of a building can be improved, such as through the use of better insulation materials or the implementation of sound-absorbing measures.

Importance of Complying with Acoustic Standards and Regulations

Complying with acoustic standards and regulations is important in the world of construction for several reasons, including:

Health and Safety: Excessive noise can be detrimental to health and safety, causing hearing damage, stress, and other health issues. Complying with acoustic standards and regulations helps in ensuring the health and safety of building occupants.

Comfort: Acoustic standards and regulations help in ensuring that buildings provide a comfortable living and working environment by reducing the impact of external noise on the indoor environment.

Legal Requirements: Failure to comply with acoustic standards and regulations can result in legal action, fines, and even the closure of buildings.

Acoustic testing an Important Process
Acoustic testing is an important process in the world of construction that helps in ensuring buildings meet acoustic requirements and standards. There are several types of acoustic tests that can be conducted to evaluate the sound insulation performance of a building, including airborne sound insulation tests, impact sound insulation tests, and reverberation time tests.

Room Integrity Testing Frequently Asked Questions
To try and explain what’s involved in a room integrity test, we have written the following question and answers article:

Q – Why do I need a room integrity test?

A – The test is a requirement of the British Standard for gaseous fire extinguishing systems – BS EN: ISO 14520. Most fire insurers will require evidence that the test has been conducted and the result is satisfactory.

Q – How quickly can a room integrity test be arranged?

A – We can usually undertake a room integrity test within a few days of our client’s inquiry; however, in the case of an emergency, we do offer a 24-hour service.

Q – How do I prepare my protected enclosure for the integrity test?

A – We send out an informative checklist with all our quotations, to help clients prepare for the integrity test.

Q – How long does it take to carry out a room Integrity test?

A – The room integrity test is usually between 1 and 2 hours for a single enclosure.

Q – Will the enclosure integrity test set off alarms?

No, the enclosure test is completely independent of the detection system; however, the room should be isolated and the system turned to manual in line with our room integrity checklist.

Q – Is the room integrity test disruptive?

A – No, it is only necessary to stop access to the room for 10-15 minutes. Personnel – such as IT staff can continue to work in the room. The enclosure test can be paused if immediate access becomes required.

Q – Does equipment such as servers need to be switched off during the room integrity test?

A – No, the servers can carry on running throughout the room integrity test.

Q – Does air conditioning need to be switched off during the enclosure integrity test?

A – Recirculation (chiller) units may continue to run. Air supply/extract ducts passing into the enclosure will need to have the fire dampers closed and/or be temporarily sealed throughout the duration of the test.

Q – Will I get a certificate if I pass the room integrity test?

A – Yes, the certificate will be issued within a few days. This should be retained for possible inspection by the authorities/insurers. We will verbally let you know if the enclosure test has passed or failed whilst on site.

Q – What happens if the room fails the room integrity test?

A – A low-impact smoke test can be undertaken along with a corresponding report to identify the air leakage paths for remedial sealing.  Once the remedial works have been undertaken a retest must be conducted to confirm the adequacy of the retention time along with the corresponding pass certification.

Q – Can remedial sealing be done at the time of the enclosure test if its initially failed?

A – Yes, provided the leakage can be swiftly remedially, or temporarily, sealed.

Q – Does APT undertake remedial sealing?

Yes, we can undertake the remedial sealing if so required, or the client can arrange the works themselves.

Q – How often should the room integrity test be done?

A – The relevant British Standard (BS EN: ISO 14520) specifies that the test should be conducted within a 12-month period and/or if any works have been undertaken to the enclosure envelope i.e., new service penetrations are made to the walls, floors, or ceilings.

Q – Is there any corresponding standards for room integrity testing?

A – Yes, the following standard applies to room integrity testing: ISO 14520, NFPA 2001, and ISO 15004

Why use us for your room integrity test?

We offer a friendly and cost-effective one-stop solution for all your integrity test requirements. Using the very latest blower door technology, we provide thorough retention reports as well as informative assessments concerning highlighting areas of leakage, advice, and recommendations. We even offer a remedial sealing service should it be required.

If you would like more information on our server room integrity testing, please call us on 01525 303 905 or visit us at  info@airpressuretesting.net or visit our Room Integrity Page.

A noise survey and report should be submitted during the pre-application process and discussions on planning applications. In many circumstances a planning condition will stipulate that a noise survey will need to be undertaken. Noise surveys are normally carried out prior to completion, however the local authority may also require post a BS 8182 noise level survey to prove that the noise standards have been achieved within the living rooms and bedrooms.

The following information will usually need to be included within the noise survey report.

1. The reason and scope of the report.
2. Location plan of the proposed development and likely receptor points such as the nearest residential window/s.
3. The noise survey Methodology including the noise monitoring location, the equipment used and the weather conditions during the noise survey.
4. Reasons for deviations from standard methods.
5. Full table of results.
6. A comparison of survey results against the noise standards.
7. Recommendations for noise control measures – acoustic barriers etc.
8. Full calculations against noise reductions expected to support any suggested noise control measures.

When is a noise survey and PPG24 report required?
A noise survey and PPG24 report may be required at the application stage or once planning
permission has been granted. A noise survey and report are required if:

• the proposed development with commercial areas that may create noise which may affect nearby noise sensitive properties. For example, a new commercial activity near existing residential properties.
• the proposed development positioning will be sensitive to noise and is likely to be affected by existing noise sources i.e. busy roads, railway, airports or commercial activity.

What is the noise Survey report for?
The noise survey report is to demonstrate that:

• the source of noise is evaluated and quantified
• nearby noise sensitive receptors identified
• noise receptors have been determined with reference to noise standards

The noise survey report (where required) will also set out control measures where it is necessary to reduce noise to acceptable levels. For example, the installation of different glazing e.g. from double to triple glazed panels or acoustic trickle vents are installed so that internal noise standards are met.

When should a noise survey report be submitted?
A noise survey report should be submitted during pre-application discussions or
more commonly during a planning application. In some circumstances, a planning condition will be included on the planning permission requiring the submission of a noise report.

As background noise surveys are usually carried out prior to completion of a development, compliance with any noise standards are demonstrated by calculation. However, the local authority may also request a post-completion noise survey assessment to prove that noise standards have been achieved.

APT is suitably qualified to carry out noise assessments and provide a noise survey reports
A noise survey must be carried out by a suitably qualified acoustic consultant. We have vast amount of experience and skill in dealing with noise surveys for the planning applications for all types of developments throughout the United Kingdom.

NEC Noise Exposure Categories (NECs)
There are four Noise Exposure Categories based on the level of noise at the development. The NEC in which the site falls determines to what extent noise should be considered in the granting of planning permission.

The NEC(s) for a development are usually determined by monitoring noise levels. Potential mitigation options can then be assessed by calculation, and/or the use of noise modelling. Appropriate noise mitigation can then be incorporated into the development at the design stage.

Planning is awash with often contradictory guidance in regards to noise. The standards, codes of practice do not precisely cover all aspects noise and the subsequent requirements. PPG24 tries to address this by the undertaking of noise surveys at the planning stage to assess the overall suitability of the site’s noise climate for residential development. With it comes the possibility of noise control measures being necessary as part of the planning.

Problems relating to noise during the planning stages can usually be avoided or resolved with a good, detailed and accurate acoustic assessment report. various mitigation measures.

We undertake accurate on-site noise assessments to suit the needs of a client’s problem and their pocket, and deliver concise and clear reports in a timescale which is again designed to suit the client. If there are problems with the noise levels, APT can propose various mitigation measures to help you comply with PPG24 or BS4142 noise surveys.

If you would like more information on noise surveys for your new development, then please contact us on 01525 303 905 or visit our website at: www.aptsoundtesting.co.uk

When designing a new project containing multiple dwellings, why go further than just meeting the basic regulations. For instance, if you only manage to achieve the minimum requirements for compliance with Building Regulations Part E for sound testing, then the chance of noise complaints will usually be higher than if you better it by 5-7dB.  

Improving Acoustics in Dwellings
The World Health Organisation defines noise as ‘unwanted sound’ and such noise in buildings can have significant effects on the people (residents) who occupy them. If a person is subjected to excess noise for long periods, it can result in physical discomfort or mental distress and in many cases noise complaints. The WHO estimates that around 50% of the population of the European Union live in areas are exposed to noise levels that do not ensure acoustic comfort to their inhabitants and more than 30% are exposed to noise levels at night which is at a level disturbing to sleep this is simply not good enough.

Within homes, a noisy neighbour can be one of the main problems experienced in attached housing. It’s estimated that up to 4 million people in Britain have had their lives disturbed by noisy neighbours.

The best way to combat excess noise is to ensure that proper precautions are taken at the design stage of the project and thereafter during construction of the building. Noise transmission levels should be compatible with the building’s usage with the correct acoustic climate provided in each space.

The UK has the building regulations and a number of sector specific guidance documents covering noise, these are:

• Approved Document E
• Building Bulletin 93
• Health Technical Memorandum 08-01
• BS8233
• BS4142

There are strong arguments for considering solutions which go above and beyond just meeting the minimum requirements in the above regulations. For instance using acoustic ceiling products and partition systems it is possible to create environments that offer greater acoustic comfort for occupants go above and beyond the standard Building Regulations requirements, which should have a positive impact on health, well-being and productivity.

Firstly, get advice on acoustic design before starting construction. The most effective way to ensure you improve the acoustics on your project and pass your sound test at the first attempt is to plan your project with sound insulation in mind. This does not need to be costly, and can save considerable time and cost at the end of the project, by reducing the chance of needing to undertake remedial works and re-testing.

The two main areas to take into consideration are usually the dividing wall and floor partitions. If you are unsure of how to build the separating wall and floor partitions and associated junctions across your project don’t panic, we can offer an acoustic design service. The degree of guidance you require can vary from site to site; however, we can cater for every eventuality by offering sample sound testing to establish the sound insulation performance of your existing wall and floors. Thereafter we can undertake more targeted design review using the information at hand.

When your project is underway, we can visit site and check the construction is being constructed as designed. Even minor alterations can have a significant impact on the effectiveness of your sound insulation measures.

If you have a new project and you need help with your acoustic design and/or sound testing then please email us at: info@aptsoundtesting.co.uk  or call us on 01525 303905. If you want more information on our full range of services please visit our website at: www.aptsoundtesting.co.uk

If you would like to download more information on how to prepare for your sound testing, please click download our sound testing checklist.